Complete maintenance and repair of your Bornemann MPC 320 screw pump

The first thing we do is disassemble your pump into its individual parts. We then clean and examine the individual components. Defective or worn parts will be replaced or repaired by us. In most cases, we mainly replace common wear parts such as seals and tension nuts. If necessary – or at your request – also feed screws, shafts and the housing insert. We then reassemble the pump in accordance with our strict maintenance guidelines and test it.

If you like, we can finish the pump off with a shiny new paint job. It makes it look like new again! We also recommend a new coating to preserve your pump and to be able to quickly detect any defects and contamination that may occur.

After that, the pump has good performance again and a long service life. Almost comparable to that of a new pump!